Barcodes Sheet: socketmobile/pdf/data-collection/ command-barcodes-sheet-7C.pdf. The web link is also provided in the below Qr Code. To open the web.
62 KB – 15 Pages
PAGE – 2 ============
PACKAGE CONTENTS PRODUCT INFORMATION © 2010-2015 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and SocketScan are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks and trade names con – tained herein may be those of their respective owners. CHS 7CiAC adapter* & USB to DC plug cable*Use the plug that is region-ally appropriateLanyardNiMHrechargeablebatteries*Also used for keyboard Pop-up (HI D Mode only)Twist-lock (horizontal/unlocked)Battery doorTwist-lock (vertical/locked)LanyardBlue/Green/Red LEDTrigger button Power button* DC-in connectorScanner headProduct label Thank you for choosing Socket Mobile!Let™s get started! Pins for charging cradle ® ® ® ® ® ® ® ® ®3
PAGE – 3 ============
SCANNER SETUPInsert the BatteriesUnlock the Battery door by us-ing a thin coin to turn the lock under the CHS to a horizontal position (turn 90 degrees).Install the batteries in their correct po-sition as indicated by the +/- symbols.Important: Only use NiMH Rechargeable batteries. Do NOT use Alkaline Batteries Attach the Lanyard (optional) Detach the string loop of the tether from the lanyard. Then feed the string loop through the slot in the Twist-lock and then through the end of the loop. Pull tight so the string loop is secure to the Twist-lock, Reat-tach the string loop to the tether from the Lanyard.If desired, attach the tether to a lan-yard or belt.CHARGE THE BATTE RY Charge the CHSThe CHS must be fully charged be- uninterrupted charging for the initial battery charge.Red LED = ChargingGreen LED = Fully charged Charging from a computer USB port is not reliable and not recommended.Socket Mobile offers a Charging Cradle (optional Accessory/sold separately, holder that charges the scanner when not in use.mobilmobile45
PAGE – 4 ============
BASIC FUNCTIONALITY Powering On: Press and hold down the small power button until the LED turns blue and the CHS beeps twice (low-high).Powering Off/ Disconnecting: Press and hold down the small power button until the CHS beeps twice (high-low).BASIC FUNCTIONALITY (CONTINUED) Scanning Barcodes: After connecting the CHS to your device, open an application and put the cursor where you want to enter data. hold the trigger button. Keep your hand steady and make sure the Red beam covers the entire width of the barcode. Not recommended scanning techniquesAim the scan beam straight across the entire barcode.Power button mobile®mobile®67
PAGE – 5 ============
CONNECTION MODES (CONTINUED)CONNECTION MODESHID Keyboard Emulation mode (default)In HID mode the CHS emulates a keyboard. This is a universal connec – The application receives the data input from the CHS. The CHS includes a keyboard pop-up feature so you can disable the CHS and accept data the connection steps using HID mode.MAC OS devices are connected using HID mode.iOS devices are connected using either iOS mode or HI D mode, but not both together. 98The CHS is connected to your iOS device using one of the following modes: 2. HID Keyboard Emulation mode (default) iOS modeiOS mode is used with a Scanner-enabled Application. Scanner controls are embedded in the Application to provide better performance, secu – If you purchased a Scanner-enabled Application on the Apple App Store (or through the Apple Volume Purchase Program for Business) that features integrated support for the CHS, we recommend you install that Application on your device and follow the Application instructions to connect with the CHS. If the connection steps are not documented in iOS mode. -abled Application supports the CHS. www.socketmobile.com/appstore
PAGE – 6 ============
HID (KEYBOARD EMULATION ) MODEHID (KEYBOARD EMULATION ) MODE (CONTINUED)10To pair the CHS with the Apple device in H ID mode: (required only the Power on the CHS. 2. Turn Bluetooth on for the Apple device. Go to Settings > Bluetooth. A Bluetooth Devices search will begin. An iOS device is always Discoverable when the Bluetooth menu is active. A MAC OS device provides an option to turn Discover-Tap Socket CHS[xxxxxx] in the list of Devices found. After a few sec -onds the fiNot Paired fl status will change to fiConnectedfl and the CHS The characters in brackets are the last 6 characters of the Bluetooth Address. The full Bluetooth address is printed in the Product Label (remove the battery door). You are now ready to scan barcodes, see instructions on page 7. 11Keyboard Pop-up EnableThe CHS emulates the keyboard in HID mode. So scanned barcode data the onscreen keyboard while connected to the CHS in HID mode.Make sure the CHS is connected to your Apple device in HI D mode.2. Open your application and place the cursor where you want to enter data. Quickly double-press the power button of the CHS (like double- clicking a mouse) to open or close the onscreen keyboard. The CHS and remove the CHS from the Bluetooth list in your device. See
PAGE – 8 ============
Unpairing the CHS: Deleting the Bluetooth Pairing In most cases, if the CHS is paired with a device, you should unpair it before trying to connect to a new device.Power on the CHS. 2. Press and hold down the trigger button. Press and hold down the power button. 4. The CHS will unpair and automatically power off. The next time you power on the CHS, it will be discoverable.Remove the CHS from the Bluetooth list in your iOS device To Unpair the CHS on your device, go to Settings > Bluetooth, tap i next to the Socket CHS [xxxxxx] name, then tap fiForget this Devicefl.mobile®APPENDIX14The remaining pages provide reference material on how to better use the CHS. We recommend you review this material and save for future reference.BLUETOOTH UNPAI RING15
PAGE – 9 ============
Automatic ReconnectionsAfter you power on the CHS, it will automatically try to connect to the last device it was connected to. Make sure the device is in range with Bluetooth On.If using HID mode, press the trigger button will enforce the connec-tion.If using iOS mode, make sure the Scanner-enabled Application is active.Make sure the device is on and in range. While the CHS is attempting to connect the Blue LED will blink every second. beep. mobile®BLUETOOTH CONNECTION16Make sure the CHS is not connected to a device before scanning a command barcode!For a complete set of command barcodes, download the Command Barcodes Sheet: www.socketmobile.com/pdf/data-collection/ command-barcodes-sheet-7C.pdfThe web link is also provided in the below QR Code. To open the web page, scan this QR Code using a QR Code Reader App in your iOS device. COMMAND BARCODES 17
PAGE – 10 ============
Bluetooth Connection ModesHID-Keyboard (default)Interface Device (HID) mode as a Keyboard class device. iOS Mode Changes the CHS to iOS mode.18COMMAND BARCODES (CONTINUED)19COMMAND BARCODES (CONTINUED)Beep SettingsBeep after CHS Decodes Data ON (default)Enables CHS to beep to indicate success-ful scans.Beep after CHS Decodes Data OFF Disables CHS from beeping to indicate successful scans.
PAGE – 11 ============
STAT US INDICATO RSStatusLED ActivityMeaningBluetoothsecondBluetooth is On but not connected.secondsCHS is connected to device.Good ReadGreen Constant (while scanning)Data successfully scanned.Battery StatusRed Blinking(while scanning and no AC power) 20% or less battery capacity remaining.Red Constant(while AC power) Battery is charging.Off (while AC power) Battery is fully charged.Off (while no AC power) CHS is Off.COMMAND BARCODES (CONTINUED)20Vibrate Settings Vibrate after CHS Decodes Data ON (default)Enables CHS to vibrate to indicate successful scans.Vibrate after CHS Decodes Data OFF Disables CHS from vibrat-ing to indicate successful scans.Factory DefaultFactory Reset all settings to factory de-faults. The CHS will power off after scanning this barcode.
62 KB – 15 Pages