The SC1 features: • Bluetooth 4.1. • Invisible beauty with custom design. • Bluetooth intercom with distance more than 1 kilometer for SC1.
51 KB – 51 Pages
PAGE – 2 ============
CONTENTS 1 INTRODUCTION ..42 PACKAGE CONTENTS ..53 INSTALLING THE SC1 ON YOUR HELMET ..63.1 Installing the SC1 .73.2 Taking out the SC1 .74 GETTING STARTED 84.1 Button Operation ..84.2 Powering On and O˜ ..84.3 Charging .84.4 Checking the Battery Level 94.5 Volume Adjustment ..94.6 Softwares .105 PAIRING THE SC1 WITH BLUETOOTH DEVICES 105.1 Mobile Phone Pairing – Mobile Phone, Bluetooth Stereo Device 115.2 Second Mobile Phone Pairing – Second Mobile Phone, GPS, and SR10 115.3 Advanced Selective Pairing – A2DP Stereo or Handsfree .126 MOBILE PHONE, GPS, SR10 136.1 Mobile Phone Call Making and Answering ..136.2 Speed Dialing (SC1 Advanced Only) 146.3 GPS Navigation .156.4 Sena SR10, Two-Way Radio Adapter 157 STEREO MUSIC .157.1 Bluetooth Stereo Music ..157.2 Music Sharing (SC1 Advanced only) 168 INTERCOM ..168.1 Intercom Pairing 178.2 Two-way Intercom ..188.3 Three-way Intercom ..198.4 Four-way Intercom 208.5 Team Signal (SC1 Advanced Only) 219 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT ..2110 GROUP INTERCOM 2211 UNIVERSAL INTERCOM 2311.1 Universal Intercom Pairing 2411.2 Two-way Universal Intercom ..2411.3 Three-way Universal Intercom 2511.4 Four-way Universal Intercom ..2612 FM RADIO 2812.1 FM Radio On and O˜ ..2812.2 Seek Frequencies 2812.3 Preset Stations .2812.4 Region Selection .2913 FUNCTION PRIORITY .29
PAGE – 3 ============
14 CONFIGURATION SETTING 3014.1 Intercom Pairing (SC1 ADVANCED only) ..3114.2 Mobile Phone Pairing .3114.3 Second Mobile Phone Pairing .3214.4 Phone selective pairing ..3214.5 Media Selective Pairing ..3214.6 Assigning Speed Dial 3214.7 Enabling/Disabling Audio Boost 3314.8 Enabling/Disabling Voice Activated Phone Answering ..3314.9 Enabling/Disabling Voice Activated Intercom ..3414.10 Setting Smart Volume Control 3414.11 Enabling/Disabling HD Intercom ..3514.12 Setting Intercom VOX Sensitivity 3514.13 Enabling/Disabling Voice Prompts ..3614.14 Enabling/Disabling RDS AF ..3614.15 Enabling/Disabling Advanced Noise ControlŽ ..3614.16 Delete All Bluetooth Pairing Information ..3614.17 Remote Control Pairing 3714.18 Universal Intercom Pairing .3714.19 Factory Reset .3714.20 Exit Voice Con˚guration Menu ..3715 REMOTE CONTROL 3916 FIRMWARE UPGRADE ..3917 TROUBLESHOOTING .4017.1 Intercom Failure ..4017.2 Intercom Reconnection ..4017.3 Factory Reset 4018 QUICK OPERATION REFERENCE ..41CERTIFICATION AND SAFETY APPROVALS 42 FCC Compliance Statement ..42 FCC RF Exposure Statement 43 FCC Caution .43 CE Declaration of Conformity 43 Industry Canada Statement ..43 Bluetooth License 44 WEEE (Waste Electrical and Electronic Equipment) ..44SAFETY INFORMATION 44 Product Storage and Management 44 Product Use .45 Battery .45PRODUCT WARRANTY AND DISCLAIMER ..46 Limited Warranty 46 Warranty Exclusions 48 Warranty Service ..50
PAGE – 4 ============
41 INTRODUCTION Thank you for choosing the SCHUBERTH SC1. With the SC1, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SC1 is compliant with the Bluetooth 4.1 supporting the following pro˚les: Headset Pro˚le, Hands-Free Pro˚le (HFP), Advanced Audio Distribution Pro˚le (A2DP), and Audio Video Remote Control Pro˚le (AVRCP). Please check with the manufacturers of other device to determine their compatibility with this headset. Please read this User™s Guide carefully before using the headset. Also check www.schuberth.com for the latest version of the User™s Guide and additional information related to SCHUBERTH Bluetooth products. The SC1 features: Bluetooth 4.1 Invisible beauty with custom design Bluetooth intercom with distance more than 1 kilometer for SC1 Advanced and up to 1 kilometer for SC1 Standard* Four-way intercom Voice prompts Smartphone App for iPhone and Android Built-in FM radio tuner with a station scan and save function (SC1 Advanced only) Universal IntercomŽ Music sharing (SC1 Advanced only) Advanced Noise ControlŽ Firmware upgradeable * in open terrain
PAGE – 8 ============
84 GETTING STARTED 4.1 Button Operation (+) Button (Œ) Button 4.2 Powering On and O˜ To power on the headset, press and hold the (+) Button and the (-) Button at the same time for 1 second while hearing ascending beeps and a voice prompt, fiHellofl . To power o˜ the headset, press and hold the (+) Button and the (-) Button at the same time for 3 seconds while hearing descending beeps and a voice prompt, fiGoodbyefl .4.3 Charging You can charge the headset by connecting the supplied USB power & data cable into a computer™s USB port or USB wall charger. You can use any standard micro USB cable to charge the unit. The LED turns red while charging and turns blue when fully charged. It takes about 2.5 hours to be completely charged. orAC Adapter Note: Please make sure to take o˜ your SC1-installed helmet while charging. The headset automatically turns o˜ during charging.
PAGE – 9 ============
94.4 Checking the Battery Level 4.4.1 LED Indicator When the headset is powering on, the red LED ˛ashes rapidly indicating the battery level. 4 ˛ashes = High, 70 ~ 100% 3 ˛ashes = Medium, 30 ~ 70% 2 ˛ashes = Low, 0 ~ 30% 4.4.2 Voice Prompt Indicator When you power on the headset, keep pressing the (+) Button and the (-) Button simultaneously for about 3 seconds until you hear three, high toned beeps. Then you will hear a voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear a voice prompt for the battery level indication. 4.5 Volume Adjustment You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when the volume reaches the maximum or minimum level. The volume is set and maintained independently at di˜erent levels for each audio source even when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand- by mode, it will a˜ect volume levels of every audio source.
PAGE – 10 ============
105 PAIRING THE SC1 WITH BLUETOOTH DEVICESBefore using the SC1 Bluetooth headset with any other Bluetooth devices for the ˚rst time, you will need to pair them together. You can pair the SC1 with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle speci˚c Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required only once for each Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects to the paired device: fiPhone connectedfl to a mobile phone, fiMedia connectedfl to a Bluetooth stereo device. 4.6 Softwares 4.6.1 Device Manager The Device Manager allows you to upgrade the ˚rmware and con˚gure the device settings directly from your PC. Using this software, you can assign speed dial presets, FM radio frequency presets and more. It is available for both Windows and Mac. For more information on downloading the Device Manager, please visit oem.sena.com/ schuberth/.4.6.2 Smartphone AppThe Smartphone App allows you to con˚gure device settings and read the User™s Guide and the Quick Start Guide. Pair your phone with your SC1 headset (please refer to section 5.1, fiMobile Phone Pairing – Mobile Phone, Bluetooth Stereo Devicefl ). Run the Smartphone App and you can con˚gure its settings directly from your smartphone. You can download the Smartphone App for Android or iPhone from oem.sena. com/schuberth/ .
PAGE – 11 ============
115.1 Mobile Phone Pairing – Mobile Phone, Bluetooth Stereo Device 1. Press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, fiCon˚guration menufl .2. Tap the (+) Button until you hear a voice prompt, fiPhone pairingfl.3. Search for Bluetooth devices on your mobile phone. Select the SC1 in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.5. The mobile phone con˚rms that pairing has completed and the SC1 is ready to use. You will hear a voice prompt, fiYour headset is pairedfl .6. If the pairing process is not completed within three minutes, the SC1 will return to stand-by mode. Note: 1. If a Bluetooth connection between the headset and a mobile phone is disconnected, press the (+) Button for 3 seconds until you hear a high tone single beep to recover the Bluetooth connection immediately. 2. If the Bluetooth connection between the headset and a media player is disconnected, press the (+) Button for 1 second to recover the Bluetooth connection and play. 5.2 Second Mobile Phone Pairing – Second Mobile Phone, GPS, and SR10 Typical Bluetooth headsets can connect with only one Bluetooth device, but a second mobile phone pairing allows the headset to connect with another Bluetooth device such as a second mobile phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter. 1. To enter the voice con˚guration menu, press and hold the (+) Button or the (-) Button for 10 seconds until you hear the voice prompt, fiCon˚guration menufl .2. Tap the (+) Button until you hear a voice prompt, fiSecond mobile phone pairingfl.3. Search for Bluetooth devices on your mobile phone. Select the SC1 in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.5. The mobile phone con˚rms that the pairing has completed and the SC1 is ready to use. You will hear a voice prompt, fiYour headset is pairedfl .
51 KB – 51 Pages